Thermometer indoor/outdoor dual display

Instructions

lnsert the battery ta start the unit. Press [°C/°F] once ta select the measure unit.

MAX/MIN FUNCTION
Pressing [MAX/MIN] once will display the maximum temperature. Pressing [MAX/MIN] once more will display the minimum temperature.
Pressing [MAX/MIN] once again ta display the ambient temperature. Pressing [MAX/MIN] again for 1 second ta clear the memory.

ALARM FUNCTION
Press [ALE] ta start the alarm function, you will see ALE (ON) on the screen.
Press [ALE] again, you will see ALE (OFF) on the screen.
Without imputing any new setting within 2 seconds, the device will reset automatically ta the initial temperature.
Hold down [ALE] for 3 seconds: the alarm for the outside temperature will flash,
press [0(/°F] ta set the default OUT temperature (-1 °C/30°F).
Press [ALE] again and then [°C/°F] ta set the default IN temperature
(5°C/39.2°F) .
Press [ALE] ta validate the settings.
If the temperature value is out of the set limit then the alarm will sound 5 times every minute until the temperature is within the set limit.

Specifications

• -50+ 70°C / -58+ 158°F
• Resolution: 0.1°
• Accuracy: ± 1 °C / ±2°F 
• Cable : 200 cm 
• MAX/MIN 
• IN/OUT 
• Alarm
• AAA battery